86 results

  • 2326QC

    Product of START PAC
    Model 2326QC Patented This unit is designed for engine starting only. This 26V air portable/carry-on START PAC® with built-in chargers, power plug and cables is designed for voltage sensitive aircraft that cannot accept a true 28V external starter. This START PAC® will provide a faster and cooler engine start (turbine is spooled to more revolutions per second, before fuel is injected) than most ship’s aircraft batteries, thus extending turbine life (less stress on starter and other engine compon…
    Save
  • 3326XL Special

    Product of START PAC
    Model 3326 XL special Patent pending This unit is designed for engine starting only. The START PAC® GPU model 3326 XL Special is the largest 26 volt jump starter in the range with a capacity of 210 Amph. It is designed to perform an extensive number of starting on any type of aircraft. It is rated at 3500 peak starting amps. The high battery capacity allows multiple starts even on cold turbine engines. It is capable of starting any type of electrically started engine, even voltage sensitive ones…
    Save
  • 3328QC/105A

    Product of START PAC
    Model Li3328QC-105A Patented This patented Ground Power Unit combination (power supply for avionics and battery bank for engine starting) is designed for ground use to perform both engine starting and maintenance functions on airplanes and helicopters. Built with the only cost effective patented Quick Change design in the world, the batteries in this unit can be easily changed in a matter of seconds without tools, training, or downtime. This GPU has a large, maintenance free, safe and proven li…
    Save
  • 53025-24/28V

    Product of START PAC
    The START PAC® Portable Power Supply model 53025-24/28V is is the smallest 24V power supply on the market. It is designed to power up 24 Volt aircraft systems. The voltage output is set to 28.5 Volts to simulate the same voltage as when the aircraft is running under power. Maximum amperage output is 25 amps which is adequate for powering up several systems on most light 24V aircraft cockpits. This unit is ideal for powering up new and old aircraft with glass cockpits. When utilizing this mini po…
    Save
  • 53050 - 24/28V

    Product of START PAC
    Model 53025-24/28V The START PAC® Portable Power Supply model 53025-24/28V is is the smallest 24V power supply on the market. It is designed to power up 24 Volt aircraft systems. The voltage output is set to 28.5 Volts to simulate the same voltage as when the aircraft is running under power. Maximum amperage output is 25 amps which is adequate for powering up several systems on most light 24V aircraft cockpits. This unit is ideal for powering up new and old aircraft with glass cockpits. When uti…
    Save
  • 53300 - 24/28V

    Product of START PAC
    Model 53300-24/28V START PAC® Model 53300-24/28V will deliver full 300 amp DC output continuously. It is designed to power up 24 Volt aircraft systems. The voltage output is set to 28 Volts to simulate the same voltage as when the aircraft is running under power. This unit is designed for maintenance and to power up various functions such as inverters, avionics, GPS and onboard air conditioning etc. Using START PAC® power supply, the operator bypasses the aircraft battery thus preserves it from …
    Save
  • 6028QC

    Product of START PAC
    Model 6028QC Patented / NSN Number 6130-01-564-9082 This unit is designed for engine starting only. This 28 volt unit will start the largest electrically started turbine or piston engines including the Garrett TPE331. This Start Pac will provide a faster and cooler engine start (turbines are spooled to more revolutions per second, before fuel is injected) than most ship’s aircraft batteries, thus extending turbine life (less stress on starter and other engine components) and at the same time pr…
    Save
  • 6028QC SUPER PAC

    Product of START PAC
    Lead Acid SUPER PAC - micro GPU Patent pending 3 lead acid SUPER PAC models are available: 2300QC SUPER PAC - micro GPU : This classic full 24V battery pack will provide better starts than onboard battery on all electrically-started turbine engines, as well as 50A continuous power for powering up aircraft systems. 2326QC SUPER PAC - micro GPU : This 26V battery pack will provide superior starts on all aircraft including voltage sensitive electrically-started turbine engines that cannot accept a …
    Save
  • 6028QC Twin Pac

    Product of START PAC
    Model 6028QC Twin Pac Patented This unit is designed for engine starting only. This powerful 28V air portable/carry-on START PAC® with built-in chargers, power plug and cables is a full 28VDC battery Twin Pac and will provide superior starts on all electrically-started turbine engines. It will provide a faster and cooler engine start (turbines are spooled to more revolutions per second, before fuel is injected) than most ship’s aircraft batteries, thus extending turbine life (less stress on star…
    Save
  • AAC American Aerospace Controls Inc.

    Exhibitor
    United States of America
    • Aviation Aviation
    • Space Space
    • Defense & Security Defense & Security
    • Supplier Supplier
    • ISC (13 - 15 May)
    AAC designs and manufactures high-reliability voltage and current sensors capable of continuous operations in the harshest of environments. We offer both standard sensors and custom-designed sensors to suit any application.
    Save
  • Additive Fertigung (SLM-Technologie)

    Kompetenter Lösungsanbieter für mittlere und grosse Serien in der additiven Fertigung von Metallteilen mit SLM-Technologie (Selective Laser Melting). Wir bieten Ihnen als Systemanbieter eine Technologieberatung, das Produktdesign und die Produktion von anspruchsvollen, additiv gefertigten Bauteilen für die Industrie, Medizinaltechnik und Luftfahrt aus einer Hand an. Sehr komplexe Geometrien wirtschaftlich herstellen (complexity for free) Redesign, Gewichtsreduktion, Funktionen ins Bauteil verla…
    Save
  • Bell 407GXP

    When the mission calls for speed, performance and reliability look no further. The Bell 407GXP integrates reliability, speed, performance and maneuverability with a cabin configurable for an array of missions and payloads. Its Rolls-Royce 250-C47B/8 turbine FADEC engine delivers exceptional hot and high performance with the ability to cruise at 133 kts/246 km/h. Its spacious cabin has five club-passenger seats with an additional passenger seat in the cockpit in single pilot operations. For adde…
    Save
  • Bell 412EPI

    The workhorse goes digital with the Bell BasiX-Pro™ Flight Deck. The Bell 412EPI has the impeccable reputation of reliability in some of the most extreme climates. Its versatile cabin accommodates an array of options to suit any specific mission needs. With its Bell BasiX ProTM Integrated Avionic System, pilots are provided increased situational awareness and safety features. The Bell 412EPI’s Pratt & Whitney PT6T-9 Twin Pac® engines deliver enhanced hot-high performance and improved Category A…
    Save
  • Bell 429

    Exceptional Speed and Class Leading Performance Designed with the future in mind, the Bell 429 meets or exceeds today’s airworthiness requirements to enhance occupant safety, with the adaptability to remain at the forefront as mission requirements evolve. Innovation is at the heart of the Bell 429 light twin helicopter. The use of metallic and composite parts in its construction creates the perfect balance between rigidity and flexibility, safety and durability. An advanced avionics and systems…
    Save
  • Bell 505 Jet Ranger X

    The Bell 505 Jet Ranger X is Bell Helicopter’s new five-seat aircraft designed for safety, efficiency and reliability through the use of advanced avionics technology. It incorporates proven dynamic components, advanced aerodynamic design, a dual channel FADEC Turbomeca Arrius 2R engine and best-in-class value.
    Save
  • Bell Boeing V-22 Osprey

    The Bell Boeing V-22 redefines operational possibilities. The Bell Boeing V-22 is the world’s first production tiltrotor aircraft, successfully blending the vertical flight capability of a helicopter with the speed, range, altitude and endurance of an airplane. This unique combination provides the warfighter with an unprecedented advantage. This allows more effective mission execution and realization of missions previously unachievable in one aircraft. Comprehensively tested and currently in fu…
    Save
  • Bell Helicopter Textron Inc.

    Exhibitor
    United States of America
    • Aviation Aviation
    • Defense & Security Defense & Security
    • Special Features Special Features
    Founded in 1935 as Bell Aircraft Corporation, Bell continues to set the pace for the industry and expand the scope of vertical lift. Now an industry leader with unmatched name recognition, Bell Helicopter was the first to obtain certification for a commercial helicopter. Over its rich history, Bell has delivered more than 35,000 aircraft to our customers around the world. With forward thinking in advanced concepts, Bell Helicopter invented tilt rotor aircraft. These unique aircraft lift lik…
    Save
  • Bell Helicopters & Helicopter Services

    Product of RUAG Schweiz AG
    Proven and reliable aircraft availability The Fleet of Bell UH-1D operated by the German Air Force is maintained fully by RUAG Aviation at its location in Oberpfaffenhofen, Germany. RUAG Aviation is in charge of the maintenance and service work, including engineering tasks, modifications, upgrades, system-integrations and logistics management. In the Structural Life Extension Program, RUAG Aviation eliminated typical corrosion, wearout and aging damage of the Bell UH-1D. In 2009 RUAG Aviation r…
    Save
  • Bell V-280 Valor

    Twice the speed, twice the range of current helicopters. The Bell V-280 Valor provides warfighters strategic options, operational reach, tactical agility and overmatch at the point of decision. The Bell V-280 Valor design supports ground maneuver and is purpose built for the squad plus enablers. Safe and survivable, the design features integrated cabin armor, fly-by-wire component redundancy, state of the art countermeasures and performance. Bell Helicopter’s design to build technology used on …
    Save
  • Pirmin Berger

    Contact person of RUAG Schweiz AG
    Head of Marketing & Communication RUAG Aviation
    Save
  • Thomas Bernhard

    Networker of Flükiger & Co AG
    Geschäftsführer
    Geschäftskontakte im Bereich Gesenkschmiedeteile für Luft- und Raumfahrt. Unser Kerngeschäft sind Gesenkschmiedestücke von 0,1 kg bis 200 kg Gewicht sowie Stauchteile (Wellen, Flansche, Hülsen) und Freiformschmiedeteile. Aus Stahl, Inox, Kupfer, Aluminium, Titan und Inconel werden Gesenkschmiedeteile von 0,1 bis 200 kg und Freiformschmiedestücke bis 500 kg hergestellt. Für Prototypen, klein- und mittelgrosse Serien (ca. 10‘000 Stk.) können wir Ihnen durch kurze Lieferzeiten, hohe Flexibilität u…
    Save
  • Bieneck International Inc.

    Exhibitor
    United States of America
    • Aviation Aviation
    • Space Space
    • Supplier Supplier
    Save
  • The Boeing Company

    Exhibitor
    United States of America
    • Aviation Aviation
    • Space Space
    • Defense & Security Defense & Security
    • Special Features Special Features
    • UAS UAS
    Boeing Germany Boeing has been a dedicated partner of the German aerospace industry for many decades. Today, Boeing is a strong contributor to the German economy, directly employing approximately 600 people at 11 locations throughout Germany. Boeing supports many more jobs in Germany through its supply chain and other activities. Boeing has an established network of nearly 100 suppliers in Germany. In 2016, Boeing and its supply-chain partners spent almost 1.3 billion dollars with suppliers loca…
    Save
  • PAUL BOWEN

    Networker of Sensata Technologies
    European Sales Manager
    Save
  • Béatrice Bracklo

    Contact person of The Boeing Company
    Save
  • Composites

    Product of RUAG Schweiz AG
    RUAG Aerostructures offers customized solutions in carbon composite, both multi-dimensional monolithic and sandwich structures with highest precision in: Prepreg Resin Transfer Moding Composite parts and assemblies using precision lay-up and resin transfer molding, are cured, trimmed and drilled in automated work cells and inspected using advanced NDI processes. RUAG Aerostructures is a well-established partner for OEMs in developing integrated composite structures.
    Save
  • Customized interior and exterior solutions

    Product of RUAG Schweiz AG
    Customized cabin interior The interior of your aircraft is a place of business and relaxation, with the emphasis on stylishness and intelligent functionality. This means that you can travel in a pleasing interior environment with state-of-the-art technology. From upgrades to completely new installations, we are capable of providing you with the latest communication systems while ensuring that you can travel in complete comfort. In close cooperation with world class designers, we provid…
    Save
  • Dornier 228. A platform you can rely on.

    Product of RUAG Schweiz AG
    RUAG Aviation is the OEM of the Dornier 228, the most versatile and most advanced high-wing aircraft in its class. This is why authorities all over the world count on it when it comes to demanding special missions of various kinds. Key features are the long range, high utilization rates and high payload - and all this at impressively low operational costs. Pilots know that there is hardly another aircraft combining state-of-the-art technology and efficiency in the way the Dornier 228 does. …
    Save
  • Thomas Egli

    Contact person of REWAG Feinmechanik AG
    Director Sales & Technology
    Save
  • Electronics for space applications

    Product of RUAG Schweiz AG
    High performance, maximum reliability: Whether it is a COTS-based Single-Board Computer, a full Data- Handling System, or powerful Interface Units, we can enable the “brain power” of your spacecraft or launch rocket. In the field of precise orbit determination (POD), RUAG Space is the market leader with products ranging from cost-effective COTS solutions to full-blown GNSS (Global Navigation Satellite System) POD Receivers. We focus heavily on building cutting- edge Microwave products in all fre…
    Save
  • Engines

    Product of RUAG Schweiz AG
    Safeguard availability. Count on our in-house engine MRO shops Your aircraft engines let you take off with confidence when they are kept in excellent operating condition. Fly with safety and assurance. Rely on our expert engine MRO services. Keeping your engine in shape is made easy by our proven, in-house MRO shops. our technical specialists provide you with reliable and accurate maintenance, repair and overhaul (MRO), inspection, testing and modifiction services to ensure your engines a…
    Save
  • Estech Industries AG

    Exhibitor
    Switzerland
    • Supplier Supplier
    • ISC (13 - 15 May)
    CUSTOMER-SPECIFIC SOLUTIONS FROM PROTOTYPE TO MASS PRODUCTION
    Save
  • Uli Finkenbusch

    Contact person of Lockheed Martin Corporation
    Save
  • Kadejah Franklin

    Networker
    Save
  • Dipl.Ing, Michael Frimann

    Networker of Frimann InnoSwiss
    CEO, Dipl.Ing.
    Interested parts, investor, business partner. Patent-pending innovation for various portable and stationary (pre)heating purposes, based on CO2 neutral energy. German design-patent protected on-board concept for minimizing wear on aircraft tires and recover waste energy.
    Save
  • Fuselage

    Product of RUAG Schweiz AG
    RUAG Aerostructures is as a recognized technology and quality provider in the field of automated production of fuselage segments. By developing new product and manufacturing technologies and systematically implementing the best cost strategy, RUAG Aerostructures contributes to the success of our customers as a reliable partner. Technology Leadership Highly automated lean production systems Strongly developed technology competence and skills Professional Excellence First ti…
    Save
  • GE Aviation

    Exhibitor
    United States of America
    • Aviation Aviation
    Save
  • Silvan Gruber

    Contact person of RUAG Schweiz AG
    Manager Strategic Communication RUAG Defence
    Save
  • Executive Director Business Development Beatriz Gutierrez

    Networker of State of Connecticut
    Save
  • Erich Hahn

    Networker of Carlisle Brake & Friction
    Sales Engineer
    Looking for partners in Europe for carbon brake development Steel and Carbon brake components, heat stacks, friction linings, life extension shims
    Save
  • Industrielle Messtechnik mit ZEISS Micura

    Unser modern eingerichtetes und klimatisiertes Mess- und Prüflabor für optische und taktile Messtechnik mit ZEISS Micura und konstanten Temperaturverhältnissen (20°C ±0.5°C) erlaubt uns höchste Prüfanforderungen zu erfüllen, mit einer Genauigkeit von <1 μm und somit hochpräzise Werkstücke zu messen und zu protokollieren. 3D-Koordinaten-Messmaschine ZEISS Micura X/Y/Z 500/500/500, Genauigkeit 0.7 μm + L/400 Video-Messprojektor, Vergrösserung 200-fach DXF-Vergleichsmessung, Höhenmessgeräte bis …
    Save
  • Jet Aircraft

    Product of RUAG Schweiz AG
    As a long-standing partner of the Swiss Air Force, RUAG Aviation has extensive experience in the maintenance of fighter jets and was involved in the procurement of both the F-5 Tiger and the F/A-18 Hornet from the evaluation phase onwards. Today, RUAG Aviation carries out a wide range of services for these two fighter jets. Its responsibilities include aircraft structure, engines, avionics and components in combination with support, test and training equipment, as well as system integration…
    Save
  • Knoepfel AG

    Exhibitor
    Switzerland
    • Aviation Aviation
    • Space Space
    • Defense & Security Defense & Security
    • Supplier Supplier
    • Special Features Special Features
    • UAS UAS
    • ISC (13 - 15 May)
    Save
  • Dipl.Ing. Bernd Kühnle

    Networker of Kühnle Enterprises
    Save
  • Launcher products

    Product of RUAG Schweiz AG
    Raising spacefaring to the next level: We contribute to the success of your launches – with market leading expertise in engineering and manufacturing of composite structures. For years, our Payload Fairings, Interstage Adapters, Payload Adapters, and Separation Systems have been the first choice among launch service providers. We have been the proud supplier of payload fairings on every Ariane rocket since its first launch in 1979, and have provided composite structures on all Atlas rockets in t…
    Save
  • Li2700QC

    Product of START PAC
    Model Start Li2700QC Patented This unit is designed for engine starting only. This compact air portable/carry-on START PAC® Lithium-Ion starting unit is a full 26VDC battery pack and will provide superior starts on all electrically-started turbine engines. The engineers at START PAC® specifically designed the Li2700QC Lithium aircraft starter for aircraft with over voltage protection relays that are set lower than most aircraft so that they can not accept 28V external starting source. Some of th…
    Save
  • Li2800QC

    Product of START PAC
    Model Start Li2800QC Patented This unit is designed for engine starting only. This compact air portable/carry-on START PAC® Lithium Ion starting unit is a full 28VDC battery pack and will provide superior starts on all electrically-started turbine engines. This START PAC® will provide a faster and cooler engine start (turbines are spooled to more revolutions per second, before fuel is injected) than most ship’s aircraft batteries, thus extending turbine life (less stress on starter and other en…
    Save
  • Li2800QC Twin Pac

    Product of START PAC
    Model Start Li2800QC Twin Pac Patented This unit is designed for engine starting only. This powerful Lithium Ion START PAC® starting unit is a full 28VDC portable battery pack and will provide superior starts on all electrically-started turbine engines. This versatile Twin Pac can be used as a single unit or separated for two complete Lithium units that can be easily carried on board. When used as a Twin Pac set up, this starting unit will provide additional capacity for increased number of star…
    Save
  • André Lienhart

    Networker
    Save
  • Liquid Measurement Systems

    Exhibitor
    United States of America
    • Defense & Security Defense & Security
    • Special Features Special Features
    • ISC (13 - 15 May)
    Liquid Measurement Systems (LMS) is dedicated to the design and manufacture of fuel measurement systems for primary and auxiliary fuel tanks, in rotary- and fixed-wing applications, and for the commercial and and military aircraft markets.
    Save
  • Lockheed Martin Corporation

    Exhibitor
    United States of America
    • Aviation Aviation
    • Space Space
    • Defense & Security Defense & Security
    • Supplier Supplier
    • Special Features Special Features
    • UAS UAS
    Headquartered in Bethesda, Maryland, Lockheed Martin is a worldwide global security, aerospace and information technology company that is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services.
    Save
  • Marenco AG

    Exhibitor
    Switzerland
    • Aviation Aviation
    • ISC (13 - 15 May)
    Save
  • Kevin McBrien

    Vice President, Sales and Marketing
    Advanced, high-reliability voltage and current sensors for harsh environments.
    Save
  • Mechanical & thermal products for satellites

    Product of RUAG Schweiz AG
    Individualized or serially produced: Our Spacecraft Structures, made of metal, composite or hybrid technology, are manufactured with a high degree of automation to lower cost, provide fast time to market and enable mass production for constellation programs. RUAG Space also provides Spacecraft Mechanisms for pointing solar arrays, thrusters, antennas and instruments into the right direction, in extreme conditions, with utmost precision. We also specialize in the design and production of Slipring…
    Save
  • Meteomatics AG

    Exhibitor
    Switzerland
    • UAS UAS
    Save
  • Nike Möhle

    Contact person of RUAG Schweiz AG
    Vice President Communications RUAG Space
    Save
  • MW Industries Inc.

    Exhibitor
    United States of America
    • Supplier Supplier
    • ISC (13 - 15 May)
    MW Industries, Inc. (MWI) is comprised of several manufacturing locations throughout the USA. Through decades of innovation, and dedication, MWI has proven to be a world-class supplier of custom springs, bellows, fasteners and metal stampings.
    Save
  • Head of Projects & Development, Flight Operations Engineering Joerg Neubert

    Networker of Swiss International Air Lines
    Save
  • Jonas Peschel

    Networker of Georg Fischer Automotive AG
    New Business Development Intern
    Save
  • Präzisionsfertigung

    CNC-/CAM-Fertigung von anspruchsvollen Komponenten in höchster Präzision. 13-Achsen-CNC-Dreh-/Fräscenter (TRAUB, CITIZEN, EMCO) für hochkomplexe Drehfrästeile mit bis zu 4 Werkzeugen gleichzeitig im Einsatz. Tieflochbohrungen, Langdrehteile und Kleinstbohrungen. bis Ø 32 mm ab 3 m Stange bis Ø 45 mm ab 0.75 m Stange Einlegeteile (Futterteile) bis Ø 160 mm Mikrobohrungen ab Ø 0.1 mm 6-Achsen-CNC-Fräscenter (GROB, DMG) für komplexe Geometrien in höchster Präzision, effizient dank rationellem P…
    Save
  • Propeller Aircraft Services

    Product of RUAG Schweiz AG
    Ensuring independent life cycle support. Your individual needs are the basis of our independent life cycle support services. Our core activities are focused on delivering added value as a one-stop facility for selected civil and military propeller aircraft – by improving safety, enhancing performance and increasing comfort. Benefit from reduced downtimes with our in-house tip to tail personalised solutions, which we adapt to your individual requirements. Our over 40 years of experience…
    Save
  • PX GROUP PX Préciment SA

    Exhibitor
    Switzerland
    • Supplier Supplier
    • ISC (13 - 15 May)
    Save
  • Bremes Quinn

    Networker of WTW Tracking Antennas LLC
    Save
  • REWAG Feinmechanik AG

    Exhibitor
    Switzerland
    • Supplier Supplier
    • ISC (13 - 15 May)
    CNC/CAM manufacturing (precision machining of complex parts), Additive Manufacturing (SLM technology), Industrial Metrology (3D CMM ZEISS Micura) and Solutions Development (technical consulting & production engineering) – that is what REWAG Feinmechanik AG stands for – a competent and certified (acc. AS 9100:D/EN 9100:2018) partner of the aerospace industry.
    Save
  • George Roussos

    Networker
    Save
  • RUAG Corporate Services AG

    Exhibitor
    Switzerland
    • Aviation Aviation
    • Space Space
    RUAG International is a Swiss technology group focusing on the aerospace industry. Based in Zurich (Switzerland) and with production sites in 14 countries, the company is divided into four divisions: Space, Aerostructures, MRO International and Ammotec. With its strategic focus on the Aerospace business unit, the company will consist of the two divisions Aerostructures and Space in the medium term. RUAG Space is Europe's leading supplier of products used in the aerospace industry. RUAG Aerostruc…
    Save
  • RUAG Schweiz AG

    Exhibitor
    Switzerland
    • Aviation Aviation
    RUAG is an international technology group headquartered in Switzerland, with proven expertise in security and defence. RUAG has production sites throughout the world and has gained a strong reputation as an independent provider of high quality and innovative precision products and services. RUAG is a major supplier to and strategic technology partner of armed forces and governments. RUAG has a longstanding presence in Germany and works closely with their customers to develop reliable solutions –…
    Save
  • RUAG Corporate Services AG

    Exhibitor
    Switzerland
    • Aviation Aviation
    • Space Space
    • Supplier Supplier
    • Special Features Special Features
    Together ahead. RUAG RUAG International is a Swiss technology group focusing on the aerospace industry. Based in Zurich (Switzerland) and with production sites in 14 countries, the company is divided into four areas: Space, Aerostructures, MRO International and Ammotec. With its strategic focus on aerospace, the company will consist of the two segments Aerostructures and Space in the medium term. RUAG Space is Europe's leading supplier of products used in the aerospace industry. RUAG Aerostruct…
    Save
  • RUAG Defence Deutschland GmbH, area of operations RUAG BASE 10

    Product of RUAG Schweiz AG
    RUAG BASE 10 is involved in military aerospace and avionic programmes as an airborne equipment supplier to the German, Italian and Royal Air Force of the United Kingdom and Spain since 1976. Moreover, German and Italian Tornados use the RUAG BASE 10's Dispenser Weapon Controller for the MW-1, the Gun Electronic Unit (GEU) and the Duplex Simplex Switching Unit (DUS). In addition, BTSE develops and produces test systems for almost all military areas since 1977. The range varies from aircraft pro…
    Save
  • Ronny Schreiter

    Networker of Interfast AG
    Geschäftsführer
    Kontakte Support
    Save
  • Somponents and Systems

    Product of RUAG Schweiz AG
    RUAG Aerostructures offers full fabrication capabilities to produce structural aircraft components. RUAG Aerostructures uses innovative manufacturing processes to ensuring production of high-quality, dependable and cost efficient aerostructures. As part of its comprehensive manufacturing capability, RUAG Aerostructures provides the following production operations:   Sheet metal Machining operatins Composite and metal bonding Paint and processing Tool design and fabrication…
    Save
  • START PAC

    Exhibitor
    United States of America
    • Aviation Aviation
    • Supplier Supplier
    • Special Features Special Features
    START PAC is the leading global manufacturer for reliable and cost effective ground support equipment. With more than 60 products in the START PAC line and having sold in more than 70 countries, START PAC is able to meet the requirements of 98% of business and military aircraft. START PAC is the only company to manufacture a line of safe lithium ion engine starting units for the last 13 years and has more than 60 years of engineering expertise in house to develop specialized equipment for new ap…
    Save
  • START PAC GREEN

    Product of START PAC
    Model START PAC GREEN®, the first 100% battery powered free running GPU Patent pending The START PAC GREEN® is designed to replace diesel power units GPU (Ground Power Units) providing the same service in a greener environment. This GPU is entirely battery powered and does not require an internal combustion engine for power. It will allow airports to make another step towards the airport carbon accreditation programme for reduced CO2 emissions. Such a GPU would allow to reach NetZero2050 goal. …
    Save
  • START PAC ONE

    Product of START PAC
    Model START PAC ONE Patent pending This unit is designed for engine starting only. This light duty air portable/carry-on START PAC® Lithium-Ion is the smallest and lightest (only 12lbs/5.4kg) 26V micro starting unit for aircraft on the market. It will provide emergency startings for all turbine, or piston engines. The START PAC ONE Jump Starting System is designed to be used with voltage sensitive aircraft that cannot accept true 28V external starters. This START PAC® will provide a faster and …
    Save
  • START PAC PRO

    Product of START PAC
    Model START PAC PRO Patent pending This unit is designed for engine starting only. This light duty air portable/carry-on START PAC® Lithium-Ion is the smallest, lightest (only 14lbs/6.3kg) and the only true 28V micro starting unit on the market. It will provide emergency startings for all turbine, or piston engines. This START PAC® will provide a faster and cooler engine start (turbines are spooled to more revolutions per second, before fuel is injected) than most ship’s aircraft batteries, thu…
    Save
  • Peter Straub

    Networker
    Save
  • SWISSMEM Industrieverband Swiss Aerospace Industries

    Exhibitor
    Switzerland
    • Aviation Aviation
    • Space Space
    • Defense & Security Defense & Security
    • ISC (13 - 15 May)
    Internationally successful, based in Switzerland... The engineering, electrical and metal industry occupies a key position in the Swiss national economy: it is the largest industrial employer, with approximately 318,000 employees and contributes just below 40 % of the goods exported from Switzerland, with exports at a value of 70 thousand million CHF. Today, the engineering, electrical and metal industry represents itself as an unquestionably high-tech sector with many facets. It influences a…
    Save
  • Tactical Communications - RUAG ARANEA

    Product of RUAG Schweiz AG
    RUAG ARANEA Communication Expert guarantees you maximum interoperability of your tactical or military communications in critical situations and links wide-ranging organisations, systems and devices quickly and securely.
    Save
  • Frederic Taugwalder

    Networker
    Save
  • TESBL Aerospace Cooperation

    Exhibitor
    United States of America
    • Aviation Aviation
    • Space Space
    • Defense & Security Defense & Security
    • Supplier Supplier
    Save
  • René Thoma

    Contact person of REWAG Feinmechanik AG
    Owner & CEO
    Save
  • two in one

    Exhibitor
    Switzerland
    • Aviation Aviation
    • ISC (13 - 15 May)
    Save
  • Variosystems AG

    Exhibitor
    Switzerland
    • Aviation Aviation
    • Defense & Security Defense & Security
    • Special Features Special Features
    Save
  • Mike von Rotz

    Contact person of Estech Industries AG
    Sales and market development
    Save
  • Kim Kian Wee

    Networker
    Assistant Director, Training and Innovation
    Looking for partnerships with any organisation in the provision of new services to the aviation industry.
    Save
  • Wing & Empennage

    Product of RUAG Schweiz AG
    RUAG Aerostructures is well known for our capabilities in the design and manufacturing of wing structures. We provide wing solutions for commercial and military aircraft customers such as Airbus, Boeing, Pilatus and Northrop. RUAG offers solutions at highest standards for wing and periphery structures such as flaps, spoilers, ailerons or shrouds. Our strength and experitise in both engineering and manufacturing aircrafts enable us to offer flexible, efficient and high quality products.
    Save